models
Metabo BAS 261 Precision: Regional Model and Blade Guide
The Metabo BAS 261 Precision is a compact bandsaw with regional electrical variants that should remain attached to its model identification. This guide uses the manufacturer's BAS 261 technical documentation for the 220–240 V machine family and the EU service listing. Its 103 mm cutting height makes it a small-project option. The discussion explains project fit and ownership choices without presenting a hands-on accuracy or endurance test.
As an Amazon Associate I earn from qualifying purchases. How affiliate links work.
No exact offer was matched for this model. The products below are alternative systems to investigate, not this model or guaranteed equivalents.
Documented specifications for Metabo BAS 261 Precision
| Model | Machine family | Cut height (in) | Throat (in) | Blade length (in) | Blade width range (in) | Offer |
|---|---|---|---|---|---|---|
| Metabo BAS 261 Precision | wood | 4.055 | 9.646 | 67.402 | 0.236–0.472 | No exact offer matched |
- Table dimensions
- 13.189 × 12.913 in
- Machine weight
- 71.65 lb
- Blade speed
- Not confirmed FPM
EU/regional 220–240 V family; check exact type number. Manufacturer technical PDF labels 735 speed with inconsistent unit; speedFpm left null pending unambiguous English manufacturer source. Metric dimensions converted; use 1712 mm for blades. Table dimension order retained.
The regional label belongs in the comparison
Metabo's service system distinguishes variants including EU 230 V, Swiss 230 V, and Australian 240 V configurations. That matters when a marketplace page uses the same BAS 261 name across countries. A similar photograph does not establish an appropriate plug, electrical configuration, or service arrangement for your location. Confirm the complete product and type number from the actual machine label.
For an imported or used machine, ask for the documentation matching that type number. This helps with electrical identification and later replacement-part searches. It also prevents a buyer from treating the specifications of an unrelated Metabo bandsaw as interchangeable. If the label is missing or unreadable, resolving the model identity should precede any plan to order electrical parts.
Its 103 mm opening encourages compact work
The manufacturer technical table lists 103 mm maximum height and 245 mm passage width, with a 335 by 328 mm table. It gives 400 W input and 270 W output. Those separate power figures should remain separate; comparing input watts against another saw's output rating gives a misleading impression of relative motor capability.
The practical role is small woodworking components whose full motion can be managed on and around the table. A wide flat blank may fit the passage initially but strike the column when rotated. A tall blank may leave too little room for a supporting carrier. Measure the complete setup, including the workholding method, before choosing the machine for a particular shape.
Order the blade in the manufacturer's original dimensions
The BAS 261 technical documentation specifies a 1712 mm loop, widths from 6 to 12 mm, and 0.5 mm blade thickness. Preserve those dimensions when ordering rather than rounding the length to an approximate imperial number. A compact saw advertised as ten inches can use a different blade length from another brand in the same wheel category.
Our comparison table converts dimensions to inches only to help compare machines. It is not a replacement-blade order form. Use the correct stock thickness and curve radius to select a tooth pattern and width within the approved range. If you need exceptionally tight detail, check whether the documented minimum width can follow your pattern before making assumptions based on a small overall machine size.
Separate speed data from material permission
Regional product information gives a woodworking-class blade speed of 735 metres per minute. The official technical PDF has a unit-label inconsistency beside that value, so the comparison retains a caution rather than treating the number as a new performance measurement. The speed is not evidence of steel-cutting approval. Use the exact operating manual to determine allowed materials and procedures.
A suitable wood blade, correct tension, and well-adjusted guides matter more than trying to force an operation through an unsuitable blade. When a cut begins to wander, stop and investigate blade condition and setup before increasing feed force. Establish a repeatable trial using expendable material of the same species and thickness as the intended project.
A practical ownership check before choosing the BAS 261
The manufacturer lists a 32.5 kg machine. Decide how it will reach the bench and whether it will remain there between sessions. A bench installation needs clearance for opening covers as well as room for the stock. Arrange extraction so that the hose does not obstruct the work or pull on the saw when the bench is moved.
A prospective owner should identify the replacement blade, table insert, and guide parts before purchase, especially when shopping outside the machine's original region. That small amount of preparation can distinguish a supported compact tool from a difficult import project. Compare the BS250 or SABRE-250 for a UK shop and locally supported US-voltage alternatives for a US shop. If broad-board resawing is the principal goal, look at a larger capacity class rather than choosing solely by a familiar brand name.
Questions about Metabo BAS 261 Precision: Regional Model and Blade Guide
What blade length does the BAS 261 use?
The manufacturer technical specification is 1712 mm. Use that original dimension when ordering rather than a rounded imperial equivalent.
What cutting height is documented?
The technical table gives 103 mm, approximately 4.06 inches. A fixture or carrier reduces the remaining space available for the material.
Is every BAS 261 electrically identical?
No. Metabo service listings distinguish regional variants. Confirm the complete type number and nameplate before buying or sourcing parts.
